For the last few weeks I have been preparing my rock samples for future analytical work. There are over 400 samples to be washed and prepared, first removing seaweed and barnacles, then cutting the rock down to pieces ready for further analysis. This involves a low of rock sawing and crushing using various machines, a messy job but it is very interesting as you get to see ‘inside the rock’. In this blog I will go through the first few stages of rock crushing.
Why is crushing rocks useful for scientific research?
Surprisingly, there is actually a lot you can learn from sawing and crushing rocks. I am preparing the samples for five different types of analysis:
- Large samples with a complex interior structure are sawed ready to be polished (see blog 8).
- Small pieces of rock are prepared for thin sections. Thin sections can tell us about the rock composition, structure and texture, helping us understand how they formed.
- Small pieces of rock containing organic material are selected for study at the University of Southampton for their palynomorph content such as plant spores.
- Small pieces of rock containing microfossils are retained for future sieving (see blog 3).
- Crushed rock powder will be analysed for carbon isotopes and carbon content. Samples containing plant material or a high organic content are selected.
Crushing Rock in pictures
Slice off the weathered surface of the rock using a rock saw to expose fresh rock underneath. In the pictures below you can see me sawing a conglomerate. This saw is also used for cutting small pieces of rock for thin section.
Step 2Use the rock splitter to break the sample up into smaller pieces. By splitting rocks along their bedding planes you can reveal hidden structures and fossils. Here I have split a siltstone rock and a fossilised burrow along the bedding surface was revealed. The rock pieces produced can be put aside for sieving and palynology, or crushed further for geochemical analysis.
Step 3By using a machine called a fly press the rock pieces are crushed into millimetre sized fragments.
In the next post I will detail the next steps in the rock crushing process.
Until next timeCarys